See Below for specific info between the different sizes!

JET 1050 COMPLETE

Foil Surfing/Wake Foiling/Wing-Surfing

PRODUCT DESCRIPTION: Naish Jet foils feature a medium aspect ratio delta wing planform with moderate anhedral to deliver the optimum combination of early lift, speed and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from wind surfing and wing-surfing to downwind kite foiling. The 1050 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for lightwind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 backwing, which gives the complete setup more intuitive turning and response for pumping.To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.Jet 1050 is ideal for riders 120-170 lbs

PERFORMANCE FEATURES

• Jet 1050 Front Wing = Optimized lift, speed & turning

• Stabilizer 320 Back Wing = Intuitive turning & stability

• 75 cm Mast = Improved turning & pumping performance

• Lighter Design = Better control & response

CONSTRUCTION FEATURES

• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years

• Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast

• Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts

• 5 x 20 mm Torx Head Stainless Steel Screws (Connect Wings to Fuselage) = Superior torque + corrosion resistant

• 3 x 25 mm Torx Head Stainless Steel Screws (Connect Mast to Fuselage) = Superior torque + corrosion resistant

• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Direct Connect Plate to Board) = Superior torque + corrosion resistant

JET 1250 COMPLETE

Foil Surfing/Wake Foiling/Wing-Surfing

PRODUCT DESCRIPTION Naish Jet foils feature a medium aspect ratio delta wing planform with moderate anhedral to deliver the optimum combination of early lift, speed and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from wind surfing and wing-surfing to downwind kite foiling. The 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for lightwind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 backwing, which gives the complete setup more intuitive turning and response for pumping.To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.Jet 1250 is ideal for riders 160-210 lbs

PERFORMANCE FEATURES

• Jet 1250 Front Wing = Optimized lift, speed & turning

• Stabilizer 320 Back Wing = Intuitive turning & stability

• 75 cm Mast = Improved turning & pumping performance

• Lighter Design = Better control & response  

CONSTRUCTION FEATURES

• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years

• Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast

• Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts

• 5 x 20 mm Torx Head Stainless Steel Screws (Connect Wings to Fuselage) = Superior torque + corrosion resistant

• 3 x 25 mm Torx Head Stainless Steel Screws (Connect Mast to Fuselage) = Superior torque + corrosion resistant

• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Direct Connect Plate to Board) = Superior torque + corrosion resistant

JET 1650 COMPLETE

Foil Surfing/Downwind Foiling/Wing-Surfing

PRODUCT DESCRIPTION The Jet 1650 shares many similar features to its smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performanceTo make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.Jet 1650 is ideal for riders up to 225 lbs

PERFORMANCE FEATURES

• Jet 1650 Front Wing = Optimized early lift at low speeds

• Stabilizer 450 Back Wing = Early lift & intuitive turning

• 75 cm Mast = Improved turning & pumping performance

• Lighter Design = Better control & response

CONSTRUCTION FEATURES

• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years

• Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast

• Updated Aircraft Grade Aluminum Jet/ Kite 64 cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts

• 5 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant

• 3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant

• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant

JET 2000 COMPLETE

Foil Surfing/Downwind Foiling/Wing-Surfing

PRODUCT DECSCRIPTION The Jet 2000 shares many similar features to its smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performanceTo make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.Jet 2000 is ideal for riders up to 250 lbs

PERFORMANCE FEAUTURES

• Jet 2000 Front Wing = Optimized early lift at low speeds

• Stabilizer 450 Back Wing = Early lift & intuitive turning

• 75 cm Mast = Improved turning & pumping performance

• Lighter Design = Better control & response

CONSTRUCTION FEATURES

• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years

• Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast

• Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts

• Jet 1650/2000 - 5 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant

• Jet 2450 - 3 x 30mm & 2 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant 

• 3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant

• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant

JET 2450 COMPLETE

Foil Surfing/Downwind Foiling/Wing-Surfing

PRODUCT DESCRIPTION The Jet 2450 shares many similar features to its smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performanceTo make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.Jet 2450 is ideal for riders +250 lbs

PERFORMANCE FEATURES

• Jet 2450 Front Wing = Optimized early lift at low speeds
• Stabilizer 450 Back Wing = Early lift & intuitive turning
• 75 cm Mast = Improved turning & pumping performance
• Lighter Design = Better control & response

CONSTRUCTION FEATURES

• Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years
• Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast
• Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts
• Jet 2450 - 3 x 30mm & 2 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant
• 3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant
• 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant